|
||||||||||||||||||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
 |
||
Super Soft Foam*IMPORTANT NOTE: The most accurate way to measure a foam's firmness is to look at its ILD: Indentation Load Deflection - A measure of load bearing capacity of foam. ILD is generally measured as the force (in pounds) required to compress a 50 square inch circular indentor foot into a four inch thick foam sample no smaller than 24 inches square, to a stated percentage of the foam's initial height. Common ILD values are generated at 25% of initial height.
Density: 1.0 - 1.2 lb/ft3
ILD: 8 - 15 Pounds
Quality: Good
Longevity: approx. 5 years
Common Uses: back Cushions , baby mattresses, & mattresses for people with back sores, and/or must sleep for extended periods of time.
AKA: Polyurethane Foam
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.0 - 1.3 lb/ft3
ILD: 33 - 39 Pounds
Quality: Very Low
Longevity: approx. 2 years
Common Uses: occasional use mattresses & cushions, packaging, shipping, & dog beds. NOTE: Thick pieces of poly foam will develop "sink" areas after heavy and/or everyday use.
AKA: High Density 36
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 2.6 - 2.8 lb/ft3
ILD: 32 - 38 Pounds
Quality: Very Good
Longevity: approx. 15 - 16 years
Common Uses: couch cushions, bay windows, benches, chairs, and mattresses.
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 2.6 - 2.8 lb/ft3
ILD: 45 - 55 Pounds
Quality: Very Good
Longevity: approx. 15 - 16 years
Flammability: MVSS 302
Common Uses: couch cushions, bay windows, benches, chairs, and mattresses.
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.8 lb/ft3
ILD: 75 Pounds
Quality: Very Good (for outdoors)
Longevity: approx. 5 - 7 years
Common Uses: outdoor cushions, under phifertix material, and filtering or padding that is exposed to large amounts of water.
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 6 lb/ft3
ILD: Firm to Very Firm
Quality: Good
Longevity: approx. 15 - 16 years
Common Uses: heavy and/or everyday use, such as bar seat, snowmobile seat, tractor seat, carpet padding, ect.
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.15 - 1.35 lb/ft3
ILD: 33 - 39 Pounds
Quality: Good
Longevity: approx. 8 - 10 years (Greatly depends on usage)
Common Uses: sound deadening, packaging, cases, and engine covers (only if there is no contact with oil or flames, or extreme heat).
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.50 - 1.70 lb/ft3
ILD: 65 - 75 Pounds
Quality: Good
Longevity: approx. 8 - 10 years (Greatly depends on usage)
Flammability: MVSS 302
Common Uses: sound deadening, packaging, and cases.
Specifically: Closed-Cell/ Ethylene-Ether / Dylene-Polystyrene Foam
Density: 1 lb/ft3
Quality: Good
Common Uses: arts & crafts
Specifically: Closed-Cell/ Ethylene-Ether / Dylene-Polystyrene Foam
Density: 2 lb/ft3
Quality: Good
Common Uses: jacuzzi covers, arts & crafts, and flotation.
AKA: Slow Recovery Foam
Specifically: Open-Cell/ Visco-Elastic Foam
COLOR: WHITE MEMORY FOAM
Density: 4.5 lb/ft3
ILD: 12 Pounds
Quality: Good
Longevity: approx. 13 years
Flammability: California TB 117
Passes: Section AI
COLOR: PINK MEMORY FOAM
Density: 5.5 lb/ft3
ILD: 15 Pounds
Quality: Excellent
Longevity: approx. 20 years
Flammability: California TB 117
Passes: Section AI and Section DII
Common Uses: cushions, mattresses, & mattress toppers.
Specifically: Open Cell / Natural (& Synthetic) Rubber Foam
Density: 5.6 lb/ft3
Quality: Talalay: Excelent
Longevity: Talalay: 7-15 years
Common Uses: mattresses and pillows.
Specifically: Closed Cell / Ethylene-Ether Foam / L200
Density: 1.5 - 2.5 lb/ft3
ILD: 4 - 8 Pounds
Quality: Fair
Longevity: approx. 3-10 years (Greatly depends on usage)
Common Uses: industrial gasketing applications, flotation equipment, construction expansion joints, thermal insulation applications, and cushion packaging.
-Specifically: Closed Cell / Ethylene-Ether Foam
Density: 2 lb/ft3
Quality: Fair - Good
Longevity: approx. 3-10 years (Greatly depends on usage)
Common Uses: industrial gasketing applications, thermal insulation applications, packaging, archery targets, flotation devices, bumper padding for boats, outdoor applications.
Specifically: Closed Cell / Ethylene-Ether Foam /
Type A 2pcf
Density: 1.8 - 2.2 lb/ft3
ILD: 5 Pounds
Quality: Good
Longevity: approx. 3-10 years (Greatly depends on usage)
Common Uses: thermal insulation, gaskets, pressure sensitive mounting tape, acoustic floor backing, package inserts, prosthetic devices, grounding, EKG pads, and running shoes.
Specifically: Closed Cell / Ethylene-Ether Foam
Density: 4-1/2 - 6-1/2 lb/ft3
Compression / Deflection @ 25% Defl.: 5 - 9 PSI
Quality: Good
Longevity: approx. 10-20 years (Greatly depends on usage)
Common Uses: thermal insulation, gaskets, pressure sensitive mounting tape, acoustic floor backing, package inserts, prosthetic devices, grounding, EKG pads, and running shoes.
Specifically: Closed Cell / Ethylene-Ether Foam
Density: 7-11 lb/ft3
Compression / Deflection @ 25% Defl.: 5 - 9 PSI
Quality: Very Good
Longevity: approx. 10-20 years (Greatly depends on usage)
Common Uses: thermal insulation, gaskets, pressure sensitive mounting tape, acoustic floor backing, package inserts, prosthetic devices, grounding, EKG pads, and running shoes.
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.4 lb/ft3
Quality: Good
Longevity: approx. 5 - 10 years
Common Uses: filters in heating & conditioning systems, small engines, air compressors, vacuum cleaners, ventilation units, industrial panels, and electric equipment.
AKA: Polyurethane Foam
Specifically: Open-Cell/ Urathane-Ether Foam
Density: 1.4 lb/ft3
ILD: 35 Pounds
Quality: Good
Longevity: approx. 5 - 8 years
Common Uses: packaing of sensitive circuit boards, computer chips and other electronics.
IMPORTANT NOTE:
We cannot guarantee the applicability or the accuracy of this information (including foam details) or the suitability of the product for any particular purpose. Thess products are sold without warranty, expressed or Implied. (Unless otherwise stated in our "Return Poly" in the customer service section) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.