Dryfast Specs
PROPERTY
Rating
Cell Count
(Pores per square inch)
25
Density
(Pounds per cubic foot)
1.8
Volumetric air flow rate
(CFM)
20
IFD 25%
IFD 65%
(Pounds)
75
135

Tensile Strength
(PSI minimum)
20
Elongation at Break
150%
Tear Strength
(lbs. PSI)
5
Sag Factor
(Nominal)
1.8
Compression set
(@ 50% Deflection)
20% loss maximum
Tear Strength Dry Heat Loss
15% maximum
(rated to 284 F)
All testing for Dryfast Foam is done by the ASTM D 3574-91 standard.

We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or Implied. (Unless otherwise stated in our "Return Poly" in the customer service section) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.